Valid HP HPE6-A85 Test Review - Reliable HPE6-A85 Test Book

If you choose to sign up to participate in HP certification HPE6-A85 exams, you should choose a good learning material or training course to prepare for the examination right now. Because HP Certification HPE6-A85 Exam is difficult to pass. If you want to pass the exam, you must have a good preparation for the exam.

The Aruba Campus Access Associate Exam certification is globally recognized and is designed to enhance the professional credibility of the candidates. It helps individuals increase their marketability in the networking industry by validating their skills and knowledge in deploying wireless networks using Aruba products. Aruba Campus Access Associate Exam certification also opens up opportunities for career advancement and higher salaries.

HP HPE6-A85 (Aruba Campus Access Associate) Exam is an essential certification for IT professionals who specialize in wireless networking. Aruba Campus Access Associate Exam certification validates their proficiency to work with Aruba wireless technologies and optimize WLAN performance. Aruba Campus Access Associate Exam certification ensures that the professionals have the necessary skills to configure and manage WLANs and guarantee their successful deployment in enterprise environments. The HPE Aruba Certified Mobility Associate certification is an excellent opportunity for IT professionals to enhance their networking skills, advance their careers, and increase their earning potential.

>> Valid HP HPE6-A85 Test Review <<

HPE6-A85 Reliable Practice Questions & HPE6-A85 Exam Training Material & HPE6-A85 Pdf Vce

ActualPDF aims to assist its clients in making them capable of passing the HP HPE6-A85 certification exam with flying colors. It fulfills its mission by giving them an entirely free Aruba Campus Access Associate Exam (HPE6-A85) demo of the dumps. Thus, this demonstration will enable them to scrutinize the quality of the Aruba Campus Access Associate Exam (HPE6-A85) study material.

Aruba Campus Access Associate certification is ideal for network administrators, engineers, and architects who are responsible for deploying and managing Aruba wireless networks. Aruba Campus Access Associate Exam certification validates the candidate's knowledge and skills in designing, deploying, and troubleshooting Aruba wireless networks.

HP Aruba Campus Access Associate Exam Sample Questions (Q76-Q81):

NEW QUESTION # 76
What change does a client make when it roams from one access point to another in a WLAN?

A. It changes the destination MAC address on its 802.11 frames.
B. It changes its default gateway to the IP of the new access point.
C. It changes the SSID to match the SSID on the new access point.
D. It changes its association with the new wireless controller's SSID.

Answer: A

Explanation:
When a client roams from one access point to another, it must change the destination MAC address on its 802.11 frames to match the new access point to which it is associated. The SSID does not change since it is typically consistent across an entire WLAN, and the default gateway remains the same as long as the client stays within the same IP subnet. The association to a new access point involves updating the destination MAC address in the frames that the client sends.

NEW QUESTION # 77
What command is used to add a static route to a network 192.168.10.0/24 via gateway 192.168.1.1 on an Aruba router?

A. route add -net 192.168.10.0 netmask 255.255.255.0 gw 192.168.1.1
B. add route 192.168.10.0/24 via 192.168.1.1
C. ip route 192.168.10.0 255.255.255.0 192.168.1.1
D. ip route 192.168.10.0/24 192.168.1.1

Answer: D

NEW QUESTION # 78
You are configuring a network with a stacked pair of 6300M switches used for distribution and layer 3 services. You create a new VLAN for users that will be used on multiple access stacks of CX6200 switches connected downstream of the distribution stack You will be creating multiple VLANs/subnets similar to this will be utilized in multiple access stacks What is the correct way to configure the routable interface for the subnet to be associated with this VLAN?

A. Create an SVl in the subnet on the 6300M stack.
B. Create a physically routed interface in the subnet on the 6300M stack for each downstream switch.
C. Create an SVl in the subnet on each downstream switch
D. Create an SVl in the subnet on the 6300M stack, and assign the management address of each downstream switch stack to a different IP address in the same subnet

Answer: A

Explanation:
Explanation
The correct way to configure the routable interface for the subnet to be associated with this VLAN is to create an SVI Switched Virtual Interface (SVI) Switched Virtual Interface (SVI) is a virtual interface on a switch that represents a VLAN and provides Layer 3 routing functions for that VLAN . SVIs are used to enable inter-VLAN routing , provide gateway addresses for hosts in VLANs , apply ACLs or QoS policies to VLANs
, etc . SVIs have some advantages over physical routed interfaces such as saving interface ports , reducing cable costs , simplifying network design , etc . SVIs are usually numbered according to their VLAN IDs (e.g., vlan 10) and assigned IP addresses within the subnet of their VLANs . SVIs can be created and configured by using commands such as interface vlan , ip address , no shutdown , etc . SVIs can be verified by using commands such as show ip interface brief , show vlan , show ip route , etc . in the subnet on the 6300M stack.
An SVI is a virtual interface on a switch that represents a VLAN and provides Layer 3 routing functions for that VLAN. Creating an SVI in the subnet on the 6300M stack allows the switch to act as a gateway for the users in that VLAN and enable inter-VLAN routing between different subnets. Creating an SVI in the subnet on the 6300M stack also simplifies network design and management by reducing the number of physical interfaces and cables required for routing.
The other options are not correct ways to configure the routable interface for the subnet to be associated with this VLAN because:
Create a physically routed interface in the subnet on the 6300M stack for each downstream switch: This option is incorrect because creating a physically routedinterface in the subnet on the 6300M stack for each downstream switch would require using one physical port and cable per downstream switch, which would consume interface resources and increase cable costs. Creating a physically routed interface in the subnet on the 6300M stack for each downstream switch would also complicate network design and management by requiring separate routing configurations and policies for each interface.
Create an SVl in the subnet on each downstream switch: This option is incorrect because creating an SVI in the subnet on each downstream switch would not enable inter-VLAN routing between different subnets, as each downstream switch would act as a gateway for its own VLAN only. Creating an SVI in the subnet on each downstream switch would also create duplicate IP addresses in the same subnet, which would cause IP conflicts and routing errors.
Create an SVl in the subnet on the 6300M stack, and assign the management address of each downstream switch stack to a different IP address in the same subnet: This option is incorrect because creating an SVI in the subnet on the 6300M stack, and assigning the management address of each downstream switch stack to a different IP address in the same subnet would not enable inter-VLAN routing between different subnets, as each downstream switch would still act as a gateway for its own VLAN only. Creating an SVI in the subnet on the 6300M stack, and assigning the management address of each downstream switch stack to a different IP address in the same subnet would also create unnecessary IP addresses in the same subnet, which would waste IP space and complicate network management.
References: https://www.arubanetworks.com/techdocs/AOS-CX/10.05/HTML/5200-7295/index.html
https://www.arubanetworks.com/techdocs/AOS-CX/10.05/HTML/5200-7295/cx-noscg/l3-routing/l3-routing-ove
https://www.arubanetworks.com/techdocs/AOS-CX/10.05/HTML/5200-7295/cx-noscg/l3-routing/l3-routing-con

NEW QUESTION # 79
Match the most cost-effective option for cabling each requirement. (All lengths indicate total cable length including patch cable(s), service loops, etc. where used.)

Answer:

Explanation:

* 100 Gbps, 3M: Direct Attach Copper
* 1 Gbps, 30M: Cat Ga
* 10 Gbps, 60M: Multimode fiber
* 1 Gbps, 2km: Single mode fiber

NEW QUESTION # 80
Which statement is true for a device with a MAC address of B8-31-B5-80-41-4F?

A. The device OUI is 80-41-4F and the device NIC serial number is B8-31-B5
B. The device OUI is B8-31-B5 and the device serial number is MD5 hash is 80-41-4F
C. The device OUI is B8-31 and the device NIC serial number is B5-80-41-4F
D. The device OUI is B8-31-B5 and the device NIC serial number is 80-41-4F

Answer: D

Explanation:
A MAC address is divided into two parts: the Organizationally Unique Identifier (OUI) and the Network Interface Controller (NIC) serial number. The OUI is the first three octets of the MAC address and is unique to the manufacturer. The NIC serial number is the last three octets and is unique to the device itself. Therefore, for the MAC address B8-31-B5-80-41-4F, the OUI is B8-31-B5, and the NIC serial number is 80-41-4F.

NEW QUESTION # 81
......

Reliable HPE6-A85 Test Book: https://www.actualpdf.com/HPE6-A85_exam-dumps.html

James Cole James Cole

Biography

Valid HP HPE6-A85 Test Review - Reliable HPE6-A85 Test Book

HPE6-A85 Reliable Practice Questions & HPE6-A85 Exam Training Material & HPE6-A85 Pdf Vce

HP Aruba Campus Access Associate Exam Sample Questions (Q76-Q81):

Follow us on

Pages

Help

Super Student

Institutes

Amman University

ILAC International College

معهد اكسفورد

معهد كابلان Kaplan

معهد بايزووتر

New College Group (NCG)

معهد اللغة الانجليزية EC

إنجلش باث EP

معهد مالفرن هاوس

CES (مركز الدراسات الانجليزية)